Whirlwind Digital Europe ~ The Audio Industry's Most Complete Digital Tool Platform... Period

HOME

PRODUCTS & PRICES

ORDERS/CONTACT

Whirlwind’s complete collection of digital tools for transmitting, receiving and processing high quality, real-time audio; easily interfaced with all other CobraNet™ and EtherSound compatible devices.

CIA

Computer Interface Alternative

This rack mounted unit replaces a standard WIndows PC for controlling the E Snake and ES2. You can preconfigure the system and provide a simpler and easier interface for non-computer savvy users.

See details here

CI8L

Converts 8 analog line level channels of audio to CobraNet digital networked data.

Read more...

Download the manual here

CO8A

Converts 8 analog line level channels of audio to CobraNet digital networked data.

Download the manual here

CO2A

2-channel CobraNet output module. Use it to provide networked digital audio wherever a 2-channel feed is required such as direct to an amp rack, feeding powered speaker arrays, stereo background music, paging systems and multimedia presentations.

Read more...

Download the manual here

PXP

Converts 16 channels of audio to and from the three major protocols in the realm of digital audio transport, CobraNet, EtherSound and A-Net.

See details here

	E-SYSTEM
	E-Sys are systems that digitize and transport up to 640 channels of uncompressed, 48 kHz, 24-bit audio signals, in real time, over an Ethernet network. Inputs and outputs can be configured as mic, line or AES/EBU digital. Digital transport is carried out over a single CAT5 Ethernet cable, fiber-optic, or wire/fiber-less infrared laser beam. Standard Ethernet switches can be configured to provide for a fully redundant network.

Digital channels can be reconverted in an analog format, such as to provide for a transparent analog link (snake), with the advantage of using a single cable connection, instead of hundred of Kg of multi-cable for a typical live-concert setting. Furthermore, the large improvement in S/N ratio and frequency transparency over an analog snake takes every sound engineer by surprise!
Alternatively, the Ethernet cable can directly interface to any mixing console or other audio gear compatible with the CobraNet™ or EtherSound protocols. Preamp gain and phantom power may also be controlled directly from Yamaha digital control surfaces, such as the PM5D. Digital channels can also be converted to individual AES/EBU digital signals.
Last, the Ethernet signal can seamlessly be distributed over a large network with analog drop-outs or drop-ins (see E-Mod), to simplify audio distribution in conference centers, hotels, arenas, etc.
CAT5 cables can be 100 m long (or 200 m with the use of an Ethernet switch). Fiber-optic cables can extend to 2 Km, while laser beam provides for a 270 m cable-less connection path.
Mic input cards are designed with high-end preamps and ADCs that provide transparent response and are equipped with full featured remote control of all operating parameters.


	E-SNAKE
	E Snake Frame (ESF) accommodates up to 32 inputs and 32 outputs and requires a power supply ESP1 (or two ESP1 for redundancy). Two or more of these units, connected through an Ethernet network, replace the traditional analog multipair audio snake. E Snake Control™ software features full remote control of the inputs and outputs.

	See details


	ES2
	E Snake (ES2) is a 8 x 2 digital I/O version of the ESF, with integral power supply (an ESP1 may be added for redundancy). It is controlled by the same E Snake Control™ software. Any number of ESF, ES2 and other CobraNet™ (or EtherSound) gear may be combined on the same network.

	See details


	E-DESK
	E Desk is a hardware and software digital signal processing platform that provides multi channel audio processing in analog and CobraNet™ applications. Through the GUI software, you can build complete systems containing virtual audio gears including mixers, processors, EQs, delays, controls, and many more. Multiple E-desk can share the DSP work load for complex designs.

	See details


	E-MOD
	E Mods are CobraNet™ compatible digital I/O modules for use in live sound, contracting, multimedia applications, etc. Products include the CO2a two channel output module and the 8-channel in and out DCS88.

	See details

ETHERNET


	E-BEAM
	E Beam is a system for transporting Ethernet data over a laser beam. It represents the latest breakthrough technology in cable-less digital transmission. Its pair of passive transceiver lens assemblies requires only a fiber-optic connection to their controllers. It’s great for “on the spot” at music festivals, over highways, building to building – anywhere a laser beam can travel and cable cannot. It's usage is allowed without licensing or approval.

	See details

Clouseau finds a wireless solution!

Belgium: Every year, for the past six years, the famous Belgian band Clouseau has surprised its fans with a combination of stunning stage layout, visual wizardry and guest artists to boot.
After their concert featuring a huge sound system flying over the circular stage in the middle of the 15,000-seater Sportpaleis venue, and the use of the Rolling Stones’ ‘Babylon Bridge’, this year, for their 13 sold-out concerts, the band opted for a ‘long version’, using the full 70m length of the arena’s stage.

Digital Consoles

Send E Snake and ES2 Directly Into Digital Consoles . . .
and control E Snake's mic preamps directly from Yamaha digital console control surfaces - like the PM5D and the new M7CL!